Flow Mode Sampling - Teledyne 4700 Pocket Manual

3.3.5 Flow Mode Sampling

Select this option to indicate whether or not the
sampler should take a sample when the Run
Program button is pressed. The Sample At
Start option is only applicable to Flow Paced
programs.
1.
Select the FLOW MODE SAMPLING
option and press Enter.
2.
Select YES to take the first sample when
the start time is reached. Select NO to
wait until the flow count triggers the first
sample.
If you select YES, when you run the program
the sampler takes the first sample immediately
(if NO DELAY TO START, see section 3.5.18)
and starts counting flow pulses for the next
interval.
SELECT OPTION: (<-->)
FLOW MODE SAMPLING
SAMPLE AT START?
YES
Section 3 Programming
NO
3-9