Entering the Department ID and Password
When Department ID Management has been set, the Department ID and Password must be
entered before operating this machine.
NOTE
• When you are using the control card, the message "You must insert a control card." appears in the touch
panel display. Insert the control card into the card slot. (See "Inserting the Control Card," on p. 10-2.)
Operations after Turning the Power ON
NOTE
• For details on how to turn the power ON, see "Main Power and Control Panel Power," on p. 1-6.
1
Press the [Department ID] key, and enter
the Department ID with the Numeric keys
(
0
-
9
).
NOTE
• If you make a mistake when entering values, press
Clear
the
key, and enter the values again.
C
2
Press the [Password] key, and enter the pass-
word with the Numeric keys (
NOTE
• If you make a mistake when entering the password,
Clear
press the
key, and enter the password again.
C
• If a password has not been set, proceed to step 3.
10-4
Entering the Department ID and Password
-
).
0
9