Dodge dakota 2002 Service Manual page 2240

DR
OVERDRIVE UNIT (Continued)
(2) Remove overdrive clutch reaction snap-ring
(Fig. 134). Note that snap-ring is located in same
groove as wave spring.
Fig. 134 Overdrive Clutch Reaction Snap-Ring
1 - REACTION RING
2 - CLUTCH HUB
(3) Remove Torx™ head screws that attach access
cover and gasket to overdrive case (Fig. 135).
(4) Remove access cover and gasket (Fig. 136).
Fig. 135 Access Cover Screw Removal
1 - TORX SCREWDRIVER (T25)
2 - ACCESS COVER SCREWS
Fig. 136 Access Cover And Gasket Removal
1 - ACCESS COVER AND GASKET
Removal
AUTOMATIC TRANSMISSION - 48RE
(5) Expand output shaft bearing snap-ring with
expanding-type snap-ring pliers. Then push output
shaft forward to release shaft bearing from locating
ring (Fig. 137).
Fig. 137 Releasing Bearing From Locating Ring
1 - EXPAND BEARING LOCATING RING WITH SNAP-RING
PLIERS
2 - ACCESS HOLE
(6) Lift gear case up and off geartrain assembly
(Fig. 138).
Fig. 138 Removing Geartrain
1 - GEARTRAIN ASSEMBLY
2 - GEAR CASE
21 - 401