Dodge dakota 2002 Service Manual page 2510

DR
TRANSFER CASE - NV243 (Continued)
Fig. 43 Remove Input Gear Bearing
1 - INPUT GEAR BEARING
2 - FRONT CASE
Fig. 44 Remove Front Output Shaft Bearing
1 - FRONT CASE
2 - INSTALLER 6436
3 - HANDLE C-4171
(6) Remove input gear pilot bearing by inserting a
suitably sized drift into the splined end of the input
gear and driving the bearing out with the drift and a
hammer (Fig. 45).
(7) Install new pilot bearing with Remover/In-
staller 8684.
(8) Remove the front output shaft rear bearing
with the screw and jaws from Remover L-4454 and
Cup 8148 (Fig. 46).
TRANSFER CASE - NV243
Fig. 45 Remove Input Gear Pilot Bearing
1 - DRIFT
2 - INPUT GEAR
Fig. 46 Front Output Shaft Rear Bearing Removal
1 - REAR CASE
2 - SPECIAL TOOL L-4454-1 AND L-4454-3
3 - SPECIAL TOOL 8148
21 - 671