Dodge dakota 2002 Service Manual page 1876

DR
MANUAL TRANSMISSION - NV3500 (Continued)
(16) Install backup light switch (Fig. 118).
Fig. 118 BACKUP LIGHT SWITCH
1 - BACKUP LIGHT SWITCH
(17) Install input shaft snap ring (Fig. 119).
Fig. 119 SHAFT SNAP RING - TYPICAL
1 - INPUT SHAFT SNAP RING
(18) Install new oil seal in front bearing retainer
with Installer 6448 (Fig. 120).
Fig. 120 BEARING RETAINER OIL SEAL
1 - INSTALLER
2 - FRONT BEARING RETAINER
MANUAL TRANSMISSION - NV3500
(19) Apply bead of Mopar silicone sealer or equiv-
alent to flange surface of front bearing retainer (Fig.
121).
Fig. 121 SEAL BEARING RETAINER - TYPICAL
1 - APPLY SEALER BEAD
2 - INPUT SHAFT BEARING RETAINER
(20) Align and install front bearing retainer over
input shaft and onto housing mounting surface (Fig.
122). Verify bolt holes are aligned before seating
retainer.
CAUTION: Be sure sealer does not get into the oil
feed hole in the transmission case or bearing
retainer.
Fig. 122 INPUT SHAFT BEARING RETAINER
1 - INPUT SHAFT
2 - OIL FEED
3 - BEARING RETAINER
21 - 37