Dodge dakota 2002 Service Manual page 2128

DR
VALVE BODY (Continued)
(13) Remove park rod E-clip and separate rod from
manual lever (Fig. 300).
(14) Remove E-clip and washer that retains throt-
tle lever shaft in manual lever (Fig. 301).
Fig. 300 Park Rod
1 - MANUAL LEVER
2 - E-CLIP
3 - PARK ROD
Fig. 301 Throttle Lever E-Clip And Washer
1 - THROTTLE LEVER SHAFT
2 - E-CLIP AND WASHER
3 - MANUAL SHAFT
AUTOMATIC TRANSMISSION - 46RE
(15) Remove manual lever and throttle lever (Fig.
302). Rotate and lift manual lever off valve body and
throttle lever shaft. Then slide throttle lever out of
valve body.
(16) Position pencil magnet next to detent housing
to catch detent ball and spring. Then carefully
remove Retainer Tool 6583 and remove detent ball
and spring (Fig. 303).
Fig. 302 Manual And Throttle Lever
1 - PARK ROD
2 - MANUAL LEVER ASSEMBLY
3 - THROTTLE LEVER
Fig. 303 Detent Ball And Spring
1 - DETENT HOUSING
2 - DETENT SPRING
3 - DETENT BALL
4 - PENCIL MAGNET
21 - 289