Dodge dakota 2002 Service Manual page 2449

21 - 610 TRANSFER CASE - NV241 GENII
TRANSFER CASE - NV241 GENII (Continued)
(14) Install mode fork and shift rail onto the mode
sleeve.
(15) Install the mode fork, sleeve, and shift rail
into the transfer case (Fig. 65).
Fig. 65 Install Mode Fork and Shift Rail
1 - MODE FORK
2 - SHIFT RAIL
3 - MODE SLEEVE
(16) Install mainshaft into the transfer case (Fig.
66). Guide mainshaft through the mode and range
sleeves and into the input gear.
Fig. 66 Install Mainshaft
1 - FRONT CASE
2 - MAINSHAFT
(17) Install the transfer case position sensor (Fig.
67). Tighten the sensor to 20-34 N·m (16-25 ft. lbs.)
torque.
Fig. 67 Install Position Sensor
1 - FRONT CASE
2 - POSITION SENSOR
(18) Install range lever on sector shaft (Fig. 68).
(19) Install washer and nut on sector shaft to
secure shift lever. Apply 1-2 drops Mopar
Seal, or equivalent, to nut threads before installation.
Then tighten nut to 27-34 N·m (20-25 ft. lbs.) torque.
Fig. 68 Install Range Lever Nut
1 - RANGE LEVER
DR
Lock N'