Dodge dakota 2002 Service Manual page 2006

DR
AUTOMATIC TRANSMISSION - 46RE (Continued)
(7) Bottom front servo piston in bore and install
servo spring.
(8) Install front servo piston rod guide as follows:
(a) Place Tool SP-5560 (or similar size tool) on
guide and position C-clamp on tool and case (Fig.
49).
(b) Slowly compress rod guide while simulta-
neously easing seal ring into bore with suitable
tool.
(9) Install rod guide snap-ring (Fig. 49).
Fig. 49 Front Servo Rod Guide And Snap-Ring
1 - C-CLAMP
2 - ROD GUIDE
3 - SMALL SCREWDRIVER
4 - ROD GUIDE SNAP-RING
5 - TOOL SP-5560
OVERRUNNING CLUTCH, REAR BAND, AND
LOW-REVERSE DRUM
(1) Install overrunning clutch components.
(2) Position rear band and link in case (Fig. 50).
(3) Install low-reverse drum (Fig. 51). Slide drum
through rear band, onto piston retainer hub and into
engagement with overrunning clutch and race.
AUTOMATIC TRANSMISSION - 46RE
Fig. 50 Rear Band And Link
1 - REAR BAND
2 - BAND LINK
Fig. 51 Low-Reverse Drum
1 - LOW-REVERSE DRUM
2 - REAR BAND LINK
3 - HUB OF OVERDRIVE PISTON RETAINER
21 - 167