Dodge dakota 2002 Service Manual page 2132

DR
VALVE BODY (Continued)
(29) Remove the Number 10 check ball from the
transfer plate (Fig. 313). The check ball is approxi-
mately 4.8 mm (3/16 in.) in diameter.
(30) Remove transfer plate from upper housing
(Fig. 314).
(31) Turn transfer plate over so upper housing sep-
arator plate is facing upward.
Fig. 313 Number 10 Check Ball
1 - NUMBER 10 CHECK BALL (3/16 )
Fig. 314 Transfer Plate
1 - UPPER HOUSING
2 - TRANSFER PLATE
AUTOMATIC TRANSMISSION - 46RE
(32) Remove upper housing separator plate from
transfer plate (Fig. 315). Note position of filter in
separator plate for assembly reference.
(33) Remove rear clutch and rear servo check balls
from transfer plate. Note check ball location for
assembly reference (Fig. 316).
Fig. 315 Upper Housing Separator Plate
1 - TRANSFER PLATE
2 - UPPER HOUSING SEPARATOR PLATE
3 - FILTER SCREEN
4 - BRACE
Fig. 316 Rear Clutch and Rear Servo Check Ball
Locations
1 - REAR CLUTCH CHECK BALL
2 - REAR SERVO CHECK BALL
3 - TRANSFER PLATE
21 - 293