Dodge dakota 2002 Service Manual page 2394

DR
INPUT CLUTCH ASSEMBLY (Continued)
(6) Install the input clutch retainer tapered snap-
ring with tapered side up onto the input clutch hub.
(7) Install Piston Guides 8504 into the input clutch
retainer (Fig. 83) and onto the input clutch hub to
guide the inner and outer underdrive piston seals
into position.
Fig. 83 Install Underdrive Piston Using Tool 8504
1 - TOOL 8504
(8) Install the underdrive piston into the input
clutch retainer and over the input clutch hub (Fig.
82).
(9) Install the UD/OD balance piston return spring
pack into the input clutch retainer.
(10) Install Piston Guide 8252 into the input
clutch retainer (Fig. 84) to guide the UD/OD balance
piston seal into position inside the underdrive piston.
Fig. 84 Install Balance Piston Using Tool 8252
1 - TOOL 8252
AUTOMATIC TRANSMISSION - 45RFE/545RFE
(11) Install the UD/OD balance piston into the
input clutch retainer and the underdrive piston.
(12) Using Spring Compressor 8251, compress the
UD/OD return spring pack and secure the piston in
place with the snap-ring (Fig. 85).
Fig. 85 Compressing UD/OD Balance Piston Using
1 - PRESS
2 - TOOL 8251
3 - BALANCE PISTON
Tool 8251
21 - 555