Dodge dakota 2002 Service Manual page 2144

DR
VALVE BODY (Continued)
Fig. 335 Boost Valve Tube And Brace
1 - BOOST VALVE TUBE
2 - TUBE BRACE
Fig. 336 Securing Boost Valve Tube With Brace
1 - BEND TABS UP AGAINST TUBE AS SHOWN
3-4 ACCUMULATOR
(1) Position converter clutch valve and 3-4 shift
valve springs in housing (Fig. 337).
(2) Loosely attach accumulator housing with right-
side screw (Fig. 337). Install only one screw at this
time as accumulator must be free to pivot upward for
ease of installation.
(3) Install 3-4 shift valve and spring.
(4) Install converter clutch timing valve and
spring.
Tabs
AUTOMATIC TRANSMISSION - 46RE
(5) Position plug on end of converter clutch valve
spring. Then compress and hold springs and plug in
place with fingers of one hand.
(6) Swing accumulator housing upward over valve
springs and plug.
(7) Hold accumulator housing firmly in place and
install remaining two attaching screws. Be sure
springs and clutch valve plug are properly seated
(Fig. 338). Tighten screws to 4 N·m (35 in. lbs.).
Fig. 337 Converter Clutch And 3-4 Shift Valve
1 - RIGHT-SIDE SCREW
2 - 3-4 ACCUMULATOR
3 - 3-4 SHIFT VALVE SPRING
4 - CONVERTER CLUTCH VALVE SPRING
Fig. 338 Seating 3-4 Accumulator On Lower
1 - ACCUMULATOR BOX
2 - CONVERTER CLUTCH VALVE PLUG
21 - 305
Springs
Housing