Dodge dakota 2002 Service Manual page 2037

21 - 198 AUTOMATIC TRANSMISSION - 46RE
ELECTRONIC GOVERNOR (Continued)
REMOVAL
(1) Hoist and support vehicle on safety stands.
(2) Remove transmission fluid pan and filter.
(3) Disengage wire connectors from pressure sen-
sor and solenoid (Fig. 84).
Fig. 84 Governor Solenoid And Pressure Sensor
1 - PRESSURE SENSOR
2 - PRESSURE SOLENOID
3 - GOVERNOR
(4) Remove screws
retainer to governor body.
(5) Separate solenoid retainer from governor (Fig.
85).
Fig. 85 Pressure Solenoid Retainer
1 - PRESSURE SOLENOID RETAINER
2 - GOVERNOR
holding pressure solenoid
(6) Pull solenoid from governor body (Fig. 86).
(7) Pull pressure sensor from governor body.
(8) Remove bolts holding governor body to valve
body.
Fig. 86 Pressure Solenoid and O-ring
1 - PRESSURE SOLENOID
2 - O-RING
3 - GOVERNOR
(9) Separate governor body from valve body (Fig.
87).
(10) Remove governor body gasket.
Fig. 87 Governor Body and Gasket
1 - GOVERNOR BODY
2 - GASKET
DR