DR
MANUAL TRANSMISSION - NV3500 (Continued)
(24) Install third gear needle bearing on shaft (Fig.
70).
Fig. 70 THIRD GEAR BEARING
1 - THIRD GEAR BEARING
(25) Install third gear on shaft and bearing (Fig.
71).
Fig. 71 THIRD GEAR
1 - THIRD GEAR
2 - BEARING
MANUAL TRANSMISSION - NV3500
(26) Install third speed synchro ring on third gear
(Fig. 72).
Fig. 72 THIRD GEAR SYNCHRO RING
1 - THIRD SPEED SYNCHRO RING
2 - THIRD GEAR
(27) Start 3-4 synchro hub on output shaft splines
by hand (Fig. 73).
CAUTION: The 3-4 synchro hub and sleeve can be
installed backwards if care is not exercised. One
side of the sleeve has grooves in it, this side must
faces the front of the shaft.
Fig. 73 3-4 SYNCHRO HUB ON OUTPUT SHAFT
1 - GROOVED SIDE OF SLEEVE
2 - 3-4 SYNCHRO ASSEMBLY
21 - 23