Dodge dakota 2002 Service Manual page 2086

DR
PLANETARY GEARTRAIN/OUTPUT SHAFT (Continued)
(10) Install tabbed thrust washer on front plane-
tary gear (Fig. 230). Seat washer tabs in matching
slots in face of gear carrier. Use extra petroleum jelly
to hold washer in place if desired.
Fig. 230 Installing Thrust Washer On Front
Planetary Gear
1 - TABBED THRUST WASHER
2 - FRONT PLANETARY GEAR
(11) Install front annulus gear over and onto front
planetary gear (Fig. 231). Be sure gears are fully
meshed and seated.
(12) Install front planetary and annulus gear
assembly (Fig. 232). Hold gears together and slide
them onto shaft. Be sure planetary pinions are
seated on sun gear and that planetary carrier is
seated on intermediate shaft.
(13) Place geartrain in upright position. Rotate
gears to be sure all components are seated and prop-
erly assembled. Snap-ring groove at forward end of
intermediate shaft will be completely exposed when
components are assembled correctly.
AUTOMATIC TRANSMISSION - 46RE
Fig. 231 Assembling Front Planetary And Annulus
1 - FRONT ANNULUS GEAR
2 - FRONT PLANETARY GEAR
Fig. 232 Installing Front Planetary And Annulus
Gear Assembly
1 - DRIVING SHELL
2 - ASSEMBLED FRONT PLANETARY AND ANNULUS GEARS
21 - 247
Gears