Dodge dakota 2002 Service Manual page 2395

21 - 556 AUTOMATIC TRANSMISSION - 45RFE/545RFE
INPUT CLUTCH ASSEMBLY (Continued)
(13) Install the underdrive clutch pack into the
input clutch retainer (Fig. 82).
(14) Install the UD/OD reaction plate lower flat
snap-ring (Fig. 86). The correct snap-ring can be
identified by the two tabbed ears.
1 - BEARING NUMBER 3
2 - OD HUB/SHAFT
3 - SNAP-RING (WAVE)
4 - REV/OD REACTION PLATE
5 - BEARING NUMBER 4
6 - SNAP-RING (FLAT)
7 - REVERSE HUB/SHAFT
8 - REVERSE CLUTCH
9 - REVERSE REACTION PLATE
input clutch retainer. The reaction plate is to be
installed with the big step down.
tapered snap-ring with tapered side up.
Fig. 86 Input Clutch Assembly - Part II
10 - SNAP-RING (SELECT)
11 - PLATE
12 - DISC
13 - OD CLUTCH
14 - SNAP-RING (TAPERED)
15 - UD/OD REACTION PLATE
16 - SNAP-RING (FLAT)
17 - UD HUB/SHAFT
18 - BEARING NUMBER 2
(15) Install the UD/OD reaction plate into the
(16) Install the UD/OD reaction plate upper
DR