Dodge dakota 2002 Service Manual page 1857

21 - 18 MANUAL TRANSMISSION - NV3500
MANUAL TRANSMISSION - NV3500 (Continued)
(2) Install reverse gear over needle bearing (Fig.
51).
Fig. 51 REVERSE GEAR
1 - REVERSE GEAR
(3) Install brass synchro ring on reverse gear (Fig.
52).
Fig. 52 REVERSE GEAR SYNCHRO
1 - REVERSE GEAR
2 - SYNCHRO RING
(4) Start fifth-reverse synchro assembly on output
shaft splines by hand. Then seat synchro onto shaft
with shop press and Remover 6310-1 (Fig. 53).
CAUTION: One side of the hub has shoulders
around the hub bore, this side faces the front of the
shaft. One side of the sleeve is tapered the tapered
side faces the front of the shaft.
(5) Install new fifth-reverse hub snap ring (Fig.
54). Verify snap ring is seated in the groove.
Fig. 53 FIFTH/REVERSE SYNCHRO ASSEMBLY
1 - SPACER
2 - PRESS RAM
3 - REVERSE GEAR
4 - FIFTH-REVERSE SYNCHRO ASSEMBLY
5 - REMOVER 6310-1
6 - PRESS BLOCKS
7 - OUTPUT SHAFT
Fig. 54 FIFTH/REVERSE SYNCHRO HUB SNAP RING
1 - FIFTH-REVERSE SYNCHRO ASSEMBLY
2 - SNAP RING
3 - PRESS BED
4 - PRESS BLOCKS
DR