Dodge dakota 2002 Service Manual page 2002

DR
AUTOMATIC TRANSMISSION - 46RE (Continued)
(25) Remove snap-ring that retains low-reverse
drum on overdrive piston retainer hub (Fig. 37).
Fig. 37 Low-Reverse Drum Snap-Ring
1 - LOW-REVERSE DRUM
2 - TABBED WASHER
3 - SNAP-RING
(26) Slide low-reverse drum and thrust washer off
piston retainer hub and out of rear band (Fig. 38).
Fig. 38 Low-Reverse Drum And Thrust Washer
1 - LOW-REVERSE DRUM
2 - SPOTFACE FOR WASHER
3 - THRUST WASHER
AUTOMATIC TRANSMISSION - 46RE
(27) Note that overrunning clutch race will remain
on splines of low-reverse drum after removal (Fig.
39). The race is a permanent press fit on the
hub splines. Do not attempt to remove the race.
(28) Remove overrunning clutch assembly (Fig.
40). Assembly can be removed without displacing
rollers and springs if care is exercised. Note position
of rollers and springs for assembly reference.
Fig. 39 Overrunning Clutch Race Position On
Low-Reverse Drum
1 - OVERRUNNING CLUTCH RACE
2 - LOW-REVERSE DRUM
Fig. 40 Overrunning Clutch Removal
1 - CLUTCH CAM
2 - OVERRUNNING CLUTCH ASSEMBLY
21 - 163