Dodge dakota 2002 Service Manual page 1679

13 - 8 FRAMES & BUMPERS
FRAME (Continued)
Fig. 12 4X4 TAPPING PLATE/SLEEVE
INSTALLATION
1 - REPLACEMENT FRAME TIP
2 - FRAME RAIL
3 - SERVICE SLEEVE
4 - PLP
5 - SWAY BAR MOUNTING BRACKET
6 - TAPPING PLATE
7 - ROOT WELD GAP
8 - SLEEVE TAB
(19) Apply ring-fillet welds into the ring-fillet weld
holes on the replacement frame tip, using the Weld
Process Specifications table. (Fig. 14)
(20) Install the upper FESM insulator onto the
replacement tip and position the service sleeve/re-
placement tip into the existing frame rail.
(21) Loosely install the lower FESM insulator and
cab mounting bolt.
Fig. 13 4X4 TAPPING PLATE/SLEEVE INSTALLATION
1 - REPLACEMENT FRAME TIP
2 - ROOT WELD GAP
3 - SERVICE SLEEVE
4 - SWAY BAR MOUNTING BRACKET
5 - TAPPING PLATE
6 - SLEEVE TAB
Fig. 14 RING FILLET WELD
1 - WELD START LOCATION
2 - WELD END LOCATION
3 - RING-FILLET WELD
DR