Vacuum Reservoir; Vehicle Speed Sensor - Chrysler neon 1997 Service Manual

SPEED TROL CABLE CON- SPEED THROTTLE LEVER CONTROL CABLE
CABLE
PL
REMOVAL AND INSTALLATION (Continued)
Fig. 13 Throttle Cable Attachment to Throttle
Body—Manual Transmission
Fig. 14 Throttle Cable Attachment to Throttle
Body—Automatic Transmission
Fig. 15 Disconnecting Throttle Cable
THROTTLE CABLE TRANSMISSION KICKDOWN CABLE
TABS
CLASP
THROTTLE CABLE
VEHICLE SPEED CONTROL SYSTEM
POWERTRAIN CONTROL MODULE
For Removal/Installation refer to Powertrain Con-
trol Module in Group 14, Fuel Injection System.

VACUUM RESERVOIR

REMOVAL
(1) Raise and support vehicle.
(2) Remove bolt on top of vacuum reservoir.
(3) Remove vacuum hoses.
(4) Remove vacuum reservoir.
INSTALLATION
(1) Install vacuum reservoir, install push pin and
tighten screw to 5 N.m (44 in. lbs.)..
(2) Install vacuum hoses.
(3) Lower vehicle.

VEHICLE SPEED SENSOR

For Removal/Installation, refer to Vehicle Speed
Sensor in Group 21, Transaxle.
8H - 11