Chrysler neon 1997 Service Manual page 440

12.7 MM (1/2 IN.) 50.8 MM (2 IN.)
PL
REMOVAL AND INSTALLATION (Continued)
CAMSHAFT OIL SEAL
REMOVAL
CAUTION: Do Not Rotate the camshaft or crank-
shaft when timing belt is removed damage to the
engine may occur.
(1) Remove timing belt cover and belt. Removal
procedure is outlined in this section. Remove cam-
shaft sprocket bolt, with the Modified Special Tool
C-4687-1 as shown in (Fig. 38).
(2) Hold camshaft sprocket with modified tool
while removing bolt. Remove sprocket from camshaft.
Fig. 38 Modification to Special Tool
(3) Remove camshaft seal using Special Tool
C-4679–A (Fig. 39).
CAUTION: Do not nick shaft seal surface or seal
bore.
GRIND
SPECIAL C-4679–A TOOL
(4) Shaft seal lip surface must be free of varnish,
SPECIAL TOOL MD 998306
dirt or nicks. Polish with 400 grit paper if necessary.
Fig. 39 Removing Camshaft Oil Seal
INSTALLATION
(1) Install camshaft seal flush with cylinder head
using Special Tool MD 998306 (Fig. 40).
Fig. 40 Installing Camshaft Seal
(2) Install camshaft sprocket retaining bolt. Hold
camshaft sprocket with Special Tool C-4687-1 (Fig.
38) and tighten bolt to 115 N·m (85 ft. lbs.).
2.0L SOHC ENGINE 9 - 27