Chrysler neon 1997 Service Manual page 572

IDLE AIR CONTROL SPEED TROL CABLE MOTOR CON-
PL
DIAGNOSIS AND TESTING (Continued)
(4) Verify the throttle cable operates freely (Fig.
56).
Fig. 56 Throttle Cable—Automatic Transmission
(5) Check the electrical connections at the idle air
control motor and throttle position sensor (Fig. 57).
Fig. 57 Idle Air Control Motor and Throttle Position
Sensor—Typical
(6) Check hose connections between the PCV
valve, vacuum port - intake manifold and the oil sep-
arator (Fig. 58).
(7) Inspect the electrical connections at the MAP
sensor/intake air temperature sensor and the (Fig.
59).
(8) Inspect the fuel injector electrical connections
(Fig. 60).
THROTTLE CABLE TRANSMISSION POSITION SEN- THROTTLE KICKDOWN CABLE SOR INTAKE MANI- FOLD PCV VALVE IGNITION COIL
FUEL SUP- FUEL RAIL
PLY LINE
Fig. 58 PCV Valve
Fig. 59 MAP/Intake Air Temperature Sensor
Fig. 60 Fuel Injectors—Typical
FUEL RAIL QUICK- FUEL CONNECTS LINE PERATURE MAP/AIR #1 SPARK PLUG SENSOR TEM-
FUEL INJEC-
TOR
FUEL SYSTEM 14 - 43
BOOT