Chrysler neon 1997 Service Manual page 131

Table of Contents

Advertisement

CALIPER GUIDE PIN
VEHICLE CARPETING
BOLTS
5 - 54
BRAKES
REMOVAL AND INSTALLATION (Continued)
Fig. 154 Rear Caliper Guide Pin Bolts
Fig. 155 Seal Grommet Installation In Floor Pan
pan. Then install park brake cable into retaining
bracket (Fig. 156). Be sure tabs (Fig. 156) on park
brake cable retainer, have expanded out to hold park
brake cable in retaining bracket.
(14) Install rear park brake cables into equalizer
(Fig. 138) on park brake lever cable.
(15) Reposition rear carpeting.
(16) Install both rear door sill plate scuff moldings,
by snapping them onto rear door sills.
(17) Install lower rear seat cushion. Be sure lower
seat cushion is fully installed in retainers on floor
pan of vehicle.
(18) Firmly grasp park brake lever locking pin
(3/16 in. drill bit) (Fig. 157) and quickly remove it
from the park brake lever mechanism. This will
allow the park brake lever mechanism to correctly
adjust the park brake cables.
(19) Cycle park brake lever ounce to position park
brake cables. Then return the park brake lever its
released position. Check the rear wheels of the vehi-
cle, they should rotate freely without dragging.
(20) Apply park brake to full engagement.
FLOOR PAN SEAL
VEHICLE WIRING HARNESS
DISC BRAKE CALIPER
GROM-
MET
CONSOLE
BRACKET
PARK BRAKE ASSEMBLY
OUTPUT CABLE
Fig. 156 Park Brake Cable Installed In Retaining
Fig. 157 Removing Lockout Pin From Park Brake
(21) Install center console assembly.
(22) Install the center console assembly attaching
screws.
PARK BRAKE SHOES WITH REAR DISC BRAKES
REMOVE
(1) Remove rear disc brake caliper assembly from
adapter and rotor (See Disc Brake Shoe Removal).
(2) Remove rear rotor from rear hub.
(3) Remove dust cap from rear hub.
(4) Remove rear hub and bearing assembly retain-
ing nut and washer.
(5) Remove rear hub and bearing assembly from
rear spindle.
(6) Remove rear brake shoe assembly hold down
clip (Fig. 158).
(7) Turn brake shoe adjuster wheel until adjuster
is at shortest length.
PARK BRAKE LEVER ASSEM-
GRASP PIN WITH PLIERS
AND QUICKLY REMOVE
BLY
FROM
PARK
LEVER ASSEMBLY
Bracket
Lever
PL
BRAKE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Neon

Table of Contents