Chrysler neon 1997 Service Manual page 609

POWER STEER- FRONT MOTOR MOUNT ING PUMP INTAKE MANIFOLD LOWER RADIATOR HOSE MOUNTING
19 - 20 STEERING
REMOVAL AND INSTALLATION (Continued)
bolt requires removal to allow the coolant tube
to be moved out of the way for access to the
power steering pump mounting bolt. The cool-
ant tube does not need to be removed or the
cooling system drained.
Fig. 23 Coolant Tube To Intake Manifold Attachment
(7) Remove the 2 power steering pump to cast
bracket mounting and adjustment bolts (Fig. 24).
Fig. 24 Power Steering Pump Mounting Bolts (Rear)
NOTE: The power steering pump front mounting
bracket is slotted at the bolt attaching it to the front
engine mount (Fig. 25). This bolt only needs to be
loosened to remove mounting bracket from engine.
(8) Loosen bolt (Fig. 25) attaching the power steer-
ing pump front mounting to the front engine mount
only far enough to slide the bracket out from under
the bolt.
(9) Remove power steering pump drive belt from
power steering pump pulley.
(10) Remove power steering pump and front
mounting bracket as an assembly from the engine
(Fig. 26).
BOLTS AIR BOLT CONDITIONING PRESSOR COOLANT TUBE COM- CAST BRACKET POWER STEERING PUMP
BOLT
Fig. 25 Power Steering Pump Front Mounting
Bracket Bolt
Fig. 26 Power Steering Pump And Bracket
(11) Transfer required parts from removed power
steering pump to replacement power steering pump.
INSTALL
(1) Install power steering pump and mounting
bracket as an assembly (Fig. 26) back on the engine
using reverse of removal procedure.
(2) Slide front power steering pump bracket
between bracket mounting bolt and front engine
mount (Fig. 25). Be sure washer on bolt is
between the head of the bolt and bracket and
does not get trapped between bracket and
engine mount.
(3) Install the 2 power steering pump to cast
mounting bracket attaching bolts (Fig. 24). Do not
tighten bolts at this time.
(4) Install power steering pump drive belt on
power steering pump pulley.
(5) Install a 1/2 in. breaker bar in the square hole
in the front power steering pump mounting bracket
(Fig. 27). Then rotate pump in to obtain the correct
POWER FRONT MOUNTING BRACKET STEERING ENGINE MOUNT POWER STEERING PUMP AIR CONDITIONING HOSE PUMP
FRONT POWER STEERING PUMP
MOUNTING BRACKET
PL