Chrysler neon 1997 Service Manual page 351

RADIATOR SURE PANEL CLO- HEADLAMP HEADLAMPBULB
8L - 8 LAMPS
REMOVAL AND INSTALLATION
CENTER HIGH MOUNTED STOP LAMP BULB . . 9
DOME LAMP BULB . . . . . . . . . . . . . . . . . . . . . 10
FOG LAMP BULB . . . . . . . . . . . . . . . . . . . . . . . . 8
FRONT SIDE MARKER LAMP BULB
HEADLAMP BULB . . . . . . . . . . . . . . . . . . . . . . . 8
LICENSE PLATE LAMP BULB
REMOVAL AND INSTALLATION
HEADLAMP BULB
REMOVAL
(1) Release hood latch and open hood.
(2) Disengage wire connector from headlamp bulb
connector.
(3) Remove retaining ring holding bulb to back of
headlamp module.
(4) Pull bulb from back of headlamp module (Fig.
1).
Fig. 1 Headlamp Bulb
INSTALLATION
CAUTION: Do not touch the glass of halogen
bulbs with fingers or other possibly oily surface,
reduced bulb life will result.
Reverse the preceding operation.
RETAINING R ING
LAMP BULB SERVICE
INDEX
page
. . . . . . . . . 9
. . . . . . . . . . . . . 10
FOG LAMP BULB
REMOVAL
base.
INSTALLATION
CAUTION:
bulbs with fingers or other possibly oily surface,
reduced bulb life will result.
PARK AND TURN SIGNAL LAMP BULB
REMOVAL
lamp to headlamp module.
INSTALLATION
BULB
PARK AND TURN SIGNAL LAMP BULB . . . . . . . 8
REAR CARGO LAMP BULB . . . . . . . . . . . . . . . 10
TAIL, STOP, BACK-UP AND TURN SIGNAL
LAMP BULB . . . . . . . . . . . . . . . . . . . . . . . . . . 9
UNDERHOOD LAMP BULB
VISOR VANITY LAMP BULB . . . . . . . . . . . . . . . 10
(1) Remove fog lamp from behind fascia.
(2) Disengage wire connector from fog lamp bulb
(3) Remove bulb from lamp (Fig. 2).
Fig. 2 Fog Lamp Bulb
Do not touch the glass of halogen
Reverse the preceding operation.
(1) Release hood latch and open hood.
(2) Remove screws holding park and turn signal
(3) Separate lamp from module.
(4) Remove bulb socket from back of lamp.
(5) Pull bulb from socket (Fig. 3).
Reverse the preceding operation.
PL
FOG LAMP
page
. . . . . . . . . . . . . . . 10