Chrysler neon 1997 Service Manual page 305

MOUNTINGSCREW ANTENNA BASE & ANTENNA ANTENNA MAST ADAPTER ANTENNA ADAPTER BRACKET ANTENNA MAST
8F - 8 AUDIO SYSTEM
REMOVAL AND INSTALLATION (Continued)
(5) Connect the antenna cable to the cable lead.
Fig. 3 Antenna Mast Removal
Fig. 4 Antenna Mast Removal - Export
Fig. 5 Antenna Mounting
RADIO
REMOVAL
(1) Remove center module bezel (Fig. 6).
ANTENNA ADAPTER ACCESS HOLE AND RIGHT PLUG FENDER FRONT
(2) Remove two mounting screws on the radio and
pull out of instrument panel (Fig. 7).
INSTRUMENT PANEL
(3) Disconnect wiring and antenna cable and
remove ground wire from radio.
INSTALLATION
For installation reverse the above procedures.
Fig. 6 Center Module Bezel
INSTRUMENT PANEL SPEAKER
REMOVAL
(1) Remove instrument panel top cover and cluster
bezel (Fig. 8). Refer to Group 8E, Instrument Panel
and Systems, for removal procedures.
(2) Remove speaker retaining screws.
(3) Remove speaker and disconnect wire connector.
INSTALLATION
For installation reverse the above procedures.
RADIO ASSEMBLY
Fig. 7 Radio Assembly
PL