Chrysler neon 1997 Service Manual page 517

RADIATOR CLOSURE PANEL
13 - 2 FRAME AND BUMPERS
REMOVAL AND INSTALLATION (Continued)
Fig. 2 Front Bumper Reinforcement
(4) Remove bolts holding fascia bracket to lower
quarter panels.
(5) Separate fascia from vehicle.
INSTALLATION
(1) Position fascia on vehicle.
(2) Install bolts holding fascia bracket to lower
quarter panels.
(3) Install push–in fasteners holding fascia to bot-
tom of rear bumper reinforcement (Fig. 3).
(4) Install bolts holding fascia to tail closure panel.
REAR BUMPER REINFORCEMENT
REMOVAL
(1) Remove rear fascia.
(2) Support bumper reinforcement on a suitable
lifting device.
(3) Remove nuts holding reinforcement to rear clo-
sure panel (Fig. 4).
FRONT BUMPER REIN- FORCEMENT
INSTALLATION
REAR CLOSURE REAR BUMPER PANEL FORCEMENT REIN-
Fig. 3 Rear Bumper Fascia
(4) Separate bumper reinforcement from vehicle.
Fig. 4 Rear Bumper Reinforcement
Reverse the preceding operation.
PL
LUGGAGE COMPART- MENT