Setup
5.11.6 Pump tab
5.11.7 Algorithm tab
Page 84
Figure 64 Factory settings dialog box, pump tab
The pump tab shows the values used for calibrating the sample pump flow rate and grab
sample flush volume, excursion bottle fill time, and bottle back flush time. These are
factory-set values that are read-only.
Return icon returns you to the setup dialog box.
Figure 65 Factory settings dialog box, algorithm tab
The algorithm tab shows the algorithms used for stabilization time, auto stabilization limit,
and UV step time. These are factory-set values that are read-only.
Return icon returns you to the setup dialog box.