Display Tab - Hach Anatel PAT700 User Manual

Setup

5.4.2 Display tab

Figure 38 System settings dialog box, display tab
Set time icon allows you to specify the date and time to be used in the system. You may
enter any valid date in "yyyy-mm-dd" format. You may enter any valid time in "hh:mm:ss"
or "hh:mm:ss tt" format. The format used is based on the selected time format.
Time format radio buttons enable you to select the time format to be used in the
system. You may select 12 or 24-hour format. Selecting one of the formats changes the
value displayed in the time box. The default selection is 24-hour format.
Temperature display radio buttons enable you to select the format for displaying
temperature values. You may select °C and °F. The default value is °C.
Conductivity display radio buttons enable you to select the format for displaying
conductivity values. You may select uncompensated conductivity (µS/cm U),
compensated conductivity (µS/cm C), or compensated resistivity (MΩ-cm C). The default
value is uncompensated conductivity. If the conductivity alarm option has been selected,
the conductivity display must be set to uncompensated conductivity (µS/cm U).
Return icon returns you to the setup dialog box and saves the changes. Any changes
are noted in the audit trail. All changes take effect on the next change of state.
Page 61