Filter Data - Hach Anatel PAT700 User Manual

9.4 Filter data

Data filtering allows you to select the type and range of data to display, export or print.
Data can be filtered by test type, date range, or special ranges.
Data types checkboxes determine what data are displayed in the data review dialog
box. By default, all data types are selected.
Select all icon selects all the data types check boxes.
Range radio buttons enable you to determine how much data are displayed in the data
review dialog box. You may select from time or special. Selecting time enables the from
and to text boxes and disables the special drop down list box. Selecting special enables
the special drop down list box and disables the from and to text boxes. The default
selection is time.
Time from and time to text boxes enable you to define the from and to date and time.
The default entries are the last 24 hours.
Special drop down list box allows you to filter data according to the last few entries of a
certain type. Analysis results are deselected using this function. You may select last
accepted, last done, or last five.
• Selecting last accepted causes the filter to include only the last accepted tests for the
selected data types.
• Selecting last done causes the filter to include only the last completed tests for the
selected data types.
• Selecting last five causes the filter to include only the last five completed tests for the
selected data types.
• Selecting special causes the data to be sorted by data type first, then by time, from
most recent to earliest. The data type will prefix each group of data. For example,
"System Suitability" will prefix the system suitability group. A blank line separates each
group.
Return icon returns you to the data review dialog box and resets the data filter according
to the options chosen.
Figure 119 Filter data dialog box
Data Review
Page 141