Manual Toc Sample; Self Clean Mode - Hach Anatel PAT700 User Manual

4.7 Manual TOC Sample

4.8 Self clean mode

A TOC analysis can be performed manually by touching the TOC Manual Sample icon.
Upon touching the TOC manual sample icon the analyzer will immediately stop its current
operation and run one TOC analysis. Upon completion of the this analysis the analyzer
will return to the mode currently selected under the run mode screen.
Figure 29 Run mode screen with manual sample
To access self clean mode, touch the self clean icon to open the self clean setup dialog
box.
Timed checkbox allows you to select timed or manual self cleaning.
Enter time text box allows you to enter the amount of time that will elapse during the
timed self cleaning. If a checkmark is present in the timed checkbox, touch the enter time
text box, then enter the desired amount of time for the self cleaning.
If a checkmark is not present in the timed checkbox, the self cleaning continues until it is
stopped by the user.
Figure 30 Self clean setup dialog box
Run Modes
Page 53