Section 10 Signing On And Off; Accessing The Password Dialog Box - Hach Anatel PAT700 User Manual

Section 10 Signing On and Off

10.1 Accessing the password dialog box

If security is enabled, to access configuration and analyzer parameters, you must log on
the system. Use the password dialog box to log on to the system.
Four different user types may access the system: guest, operator, administrator, and
factory. Only operator users may be added or deleted from the system. Passwords can
be assigned to an operator and administrator. Guest are those without passwords. The
factory password is reserved for HACH Company service and support only.
• Guest. This user type is any user who does not have a password and can not log on
to the system. This user may access most areas and view information but is not
allowed to modify any settings or initiate any operations when security is enabled.
Guests have no access to the security settings dialog box when security is enabled.
• Operator. This is a user who has been assigned a user name and password. This
user type has full access to most dialog boxes. Operators have no access to the
security settings dialog box and read-only access to the factory settings and the bottle
mode settings.
• Administrator. This user type has a password and full access to most dialog boxes.
Administrators have read-only access to the factory dialog box. The default
administrator entry has a user name of "Administrator", a user ID of "Admin", and a
password of "123456".
• Factory. This user type has full access to all dialog boxes.
Note: For security reasons, the first time an administrator or newly created operator logs on to the
system they will be required to change their password.
1. At the home screen, touch the << icon to open the sliding toolbar.
2. Touch the sign on icon.
Page 143