Pat700 Lamp Replacement - Hach Anatel PAT700 User Manual

8.3.1 PAT700 lamp replacement

To replace a lamp, follow these steps:
1. Touch the replace lamp icon.
2. Select the lamp to be replaced.
3. Touch "Run Wizard" to run the lamp replacement wizard. Touch "Replace Now" to
skip the replacement wizard. Touch "Print Instructions" to send the lamp replacement
instructions to a printer, if connected. Read the instructions completely as you
proceed with the lamp replacement.
• If you touch "Run Wizard", the lamp replacement wizard provides step-by-step
instructions for replacing the lamp. Read the instructions completely as you
proceed with the lamp replacement.
• If you touch "Replace Now", the display skips the replacement wizard and asks
you to power down the analyzer. See
procedure described in
Figure 103 Lamp replacement dialog box
Figure 103, then carefully follow the
Lamp replacement procedure, page
Diagnostics
166.
Page 127