Sliding Toolbar - Hach Anatel PAT700 User Manual

3.4.1 Sliding toolbar

• A display of the current sampling mode.
• A process animation.
• An OASIS bottle system status indicator in the lower left hand corner. (Touching this
icon provides immediate access to the bottle mode dialog box.)
• UV lamp status indicators in the lower right hand corner. (Touching this icon provides
immediate access to the diagnostics dialog box.)
The sliding toolbar consists of icons that enable you to navigate through the analyzer
menu structure or to access a single function. The toolbar is hidden most of the time. You
may access the toolbar by touching the << tab in the upper right corner of the home
screen. Touching the >> tab hides the toolbar again. If the sliding toolbar is open and an
icon or the >> tab is not touched, the toolbar closes in 15 seconds.
Figure 19 Home screen with sliding toolbar open
Run mode icon allows you to change the operating mode of the analyzer. Touching the
icon takes you to the run mode dialog box without interrupting the current analysis.
Setup icon allows you to modify the settings of the analyzer. Touching the icon takes you
to the setup dialog box, which contains navigation icons, without interrupting the current
analysis.
Bottle mode icon allows you to enter bottle mode. Touching the icon takes you to the
bottle mode dialog box without interrupting the current analysis.
Alarm icon allows you to review and acknowledge current or unacknowledged alarms. If
no alarms are present, the icon is gray. Touching the icon takes you to the alarm review
dialog box and displays all unacknowledged alarms without interrupting the current
analysis.
Startup
Page 45