PAT700 Total Organic Carbon Analyzer – Setup
Warning text box
sensor output to be measured before a lamp is marginal.
Failure text box
output to be measured before a lamp has failed.
Return icon
Pump tab
The pump tab shows the values used for calibrating the sample pump flow rate and grab
sample flush volume, excursion bottle fill time, and bottle back flush time. These are factory-
set values that are read-only.
Return icon
Algorithm tab
Anatel
(read-only) allows you to view the factory-set value for the UV Detect™
(read-only) allows you to read the factory-set value for the UV Detect sensor
returns you to the setup dialog box.
Figure 5-30 Factory settings dialog box, pump tab
returns you to the setup dialog box.
Figure 5-31 Factory settings dialog box, algorithm tab
Page 73
Operator Manual