Specifications - Hach Anatel PAT700 User Manual

Specifications

Analog output specifications
Analog outputs
Variables
Range
Alarm level
Discrete input specifications
Discrete inputs
Input one
Input two
Discrete output specifications
Discrete outputs
Output one
Output two
Output three
Output four
Serial output specifications
Serial RS-232C output
Serial printer output
Compatibility
Ethernet output specifications
Protocol
Interface speed
USB output specifications
USB output
Page 178
Input/output specifications
Three, opto-isolated
TOC, conductivity, and temperature
Configurable over 4-20 mA
Configurable: 2, 22, or last value
Two, opto-isolated
TOC analysis start
TOC/Flow with conductivity mode change
Four, opto-isolated
TOC alarm
Uncompensated conductivity alarm
Analyzer error
TOC analysis start indication
ASCII format, 8 data bits, no parity, 1 stop bit, 9600 baud
RS-232C interface, 8 data bits, no parity, 1 stop bit, 9600 baud
40-column serial printer
Modbus TCP/IP
10/100 Mbits/sec.
One, output to USB flash drive