Diagnostics
Page 132
Figure 109 Select bottles to load dialog box, plumbing test
CAUTION
Potential puncture hazard! Contact with the exposed needle could cause serious
injury. Use extreme care when installing and removing the sample bottles.
CAUTION
Potential burst hazard! Do not exceed the maximum 100 psi (690k Pa) sample
pressure ratings.
1. After you've selected the bottles to load, install the grab samples bottles following the
instructions as shown in the load bottles dialog box
you place the bottles in the correct positions.
2. Close the bottle bay door.
Figure 110 Load bottles dialog box, plumbing test
•
Bottle positions graphics show you the order in which to install the bottles.
(Figure
110) and ensuring that