Sounds Tab; Network Tab - Hach Anatel PAT700 User Manual

Setup

5.4.3 Sounds tab

5.4.4 Network tab

Page 62
Figure 39 System settings dialog box, sounds tab
Alarm, warning, stop error, and user feedback list boxes enable you to select the
system sounds to be associated with certain alarm types.
Test icons play the selected sound for the corresponding alarm.
Volume slider controls the level of the volume. Moving the slider to the right increases
the volume and moving it to the left decreases the volume.
Return icon returns you to the setup dialog box and saves the changes. Any changes
are noted in the audit trail. All changes take effect on the next change of state.
Figure 40 System settings dialog box, network tab
Static TCP/IP address text box sets the TCP/IP address for the analyzer. You may
specify a value of 0 to 255 for each octet. The default value is 192.168.0.105.
Static subnet mask text box sets the subnet mask for the analyzer. You may specify a
value of 0 to 255 for each octet. The default value is 255.255.255.0.
Static gateway text box sets the default gateway for the analyzer. You may specify a
value of 0 to 255 for each octet. The default value is blank.