Audit Trail Tab - Hach Anatel PAT700 User Manual

Setup

5.8.4 Audit trail tab

Page 74
Change password checkbox forces the specified user to change his or her password at
the next logon. The default setting for this option is disabled. Any time the password entry
is modified, this option is enabled.
• If a change was made to the password, both passwords in the password and confirm
password boxes must match. The new password may not be the same as any of the
passwords in the password history list.
• A changed password triggers an entry in the audit trail but does not list the old or new
password. The new password and date are added to the password history list.
Return icon returns you to the security settings dialog box and saves the changes. The
ID and user name must be unique. Any changes are noted in the audit trail.
Cancel icon returns you to the security settings dialog box. All changes are discarded
and no entries are made in the audit trail.
Only administrator and factory users can access the audit trail.
Any additions, modifications, or deletions to the analyzer configuration are noted by a
keyword (added, modified, or deleted), the information affected, the old value (if
applicable), the new value (if applicable), the full name of the user performing the
operation, and the date and time of the change. System events such as logging in,
exporting data, etc., are also noted in the audit log.
Figure 51 Security settings dialog box, audit trail tab
Audit trail display list box lists the filtered audit trail data.
• Daily header is displayed once per day preceding the first entry and at the change
from one day to the next.
• Entry header is displayed at the beginning of each audit trail entry. It includes the time
of the entry in long format (hh:mm:ss) and the name of the person associated with the
entry. If the analyzer time is configured for 24-hour format, the AM/PM entry is blank.