Display Tab - Hach ANATEL PAT700 Operator's Manual

Page 51

Display tab

Set time icon
any valid date in "yyyy-mm-dd" format. You may enter any valid time in "hh:mm:ss" or
"hh:mm:ss tt" format. The format used is based on the selected time format.
Time format radio buttons
You may select 12 or 24-hour format. Selecting one of the formats changes the value
displayed in the time box. The default selection is 24-hour format.
Temperature display radio buttons
temperature values. You may select °C and °F. The default value is °C.
Conductivity display radio buttons
conductivity values. You may select uncompensated conductivity (µS/cm U), compensated
conductivity (µS/cm C), or compensated resistivity (MΩ-cm C). The default value is
uncompensated conductivity. If the conductivity alarm option has been selected, the
conductivity display must be set to uncompensated conductivity (µS/cm U).
Return icon
noted in the audit trail. All changes take effect on the next change of state.
Operator Manual
Figure 5-5 System settings dialog box, display tab
allows you to specify the date and time to be used in the system. You may enter
enable you to select the time format to be used in the system.
returns you to the setup dialog box and saves the changes. Any changes are
Setup – PAT700 Total Organic Carbon Analyzer
enable you to select the format for displaying
enable you to select the format for displaying
Anatel