Filter Data - Hach ANATEL PAT700 Operator's Manual

PAT700 Total Organic Carbon Analyzer – Data Review
9.4

Filter data

Data filtering allows you to select the type and range of data to display, export or print. Data
can be filtered by test type, date range, or special ranges.
Data types checkboxes
default, all data types are selected.
Select all icon
Range radio buttons
review dialog box. You may select from time or special. Selecting time enables the from and
to text boxes and disables the special drop down list box. Selecting special enables the
special drop down list box and disables the from and to text boxes. The default selection is
time.
Time from and time to text boxes
default entries are the last 24 hours.
Special drop down list box
certain type. Analysis results are deselected using this function. You may select last
accepted, last done, or last five.
• Selecting last accepted causes the filter to include only the last accepted tests for the
• Selecting last done causes the filter to include only the last completed tests for the
• Selecting last five causes the filter to include only the last five completed tests for the
• Selecting special causes the data to be sorted by data type first, then by time, from
Return icon
the options chosen.
Anatel
determine what data are displayed in the data review dialog box. By
selects all the data types check boxes.
enable you to determine how much data are displayed in the data
selected data types.
selected data types.
selected data types.
most recent to earliest. The data type will prefix each group of data. For example,
"System Suitability" will prefix the system suitability group. A blank line separates each
group.
returns you to the data review dialog box and resets the data filter according to
Figure 9-3 Filter data dialog box
enable you to define the from and to date and time. The
allows you to filter data according to the last few entries of a
Page 125
Operator Manual