ACCULINK 3163 DSU/CSU
Block or ACAMI Assignment Method
The Assign By configuration option screen appears
after you select a port.
"
Procedure
To assign by the block or ACAMI method:
1. Press F2 for Block or F3 for ACAMI.
Assign By:
Next
F1
or
Assign By:
Next
F1
2. Press F1 (Next) to display the next configuration
option (Port Rate).
Port Rate:384
Next
F1
3-18
Block ACAMI
F2
F3
Block ACAMI
F3
F2
64
128
F2
F3
3. Use the
rate onto the screen. Rates scroll in groups of
three. Available selections depend on the current
base rate selected for the port. Press the
corresponding Function key to select the port rate.
Then, select Next to display the Start At
configuration option on the screen.
4. The Start At screen displays the network channels.
Use the
channel onto the screen. Use the Function keys to
select the starting channel. Only those DS0
channel numbers that provide enough bandwidth
(based on the configured data rate) to be used as a
starting channel number are displayed. Channel
allocation for this port can only be cleared by
selecting Clear.
March 1999
or
key to scroll the desired port
or
key to scroll the desired
Start At:Clear
Next
Clear
N1
F3
F1
F2
3163-A2-GB20-10