Resetting Autorate - Paradyne Hotwire 8775 User Manual

Table 3-1.

Resetting AutoRate

The Reset AutoRate function on the Control menu causes the unit to repeat the
AutoRate sequence. The unit attempts to establish the DSL link at the highest rate
(or the value of DSL Line Rate, which represents the AutoRate ceiling when
AutoRate is enabled). If the link fails, the next lower rate is tried until the link is
established.
To access the Reset AutoRate screen, follow this menu selection sequence:
8700-A2-GB25-10
Selectable Payload Rates When AutoRate Is Disabled
DSL
Line
Rate
(kbps) Selectable Payload Rates (kbps)
144 128 64
272 256 192
400 384 320
528 512 448
784 768 704
1040 1024 960
1552 1536 1472
2064 2048 1984
Main Menu Control
February 2001
3. Initial Startup and Configuration
640 576
896 832
1408 1344 1280
1920 1856 1792
Reset AutoRate
(default in boldface type)
1216 1152 1088
1728 1664 1600
3-11