Protection; Security - Paradyne Jetstream CPX-1000 Reference Manual

1000-A2-GH30-00

Protection

Security

Description
Table 3–33.Report Switch Parameters and Description
Parameter Parameter Type
actid SwitchId
stdbid AID SwitchId
Security
February 2003
This category contains one message: REPT SW.
Read only
REPT SW (Report Switchover). This message is generated by the
CPX-1000 after it switches an active card to standby and its mate to
active.
REPT SW: [TID]
"<actid>,<stdbid>"
;
Output Format
CPX-1000 2000-06-09 18:09:40
A 24 REPT EVT EQPT
CPX-7:INITSW,TC,06-09-2000,18:09:40,,,,,:
;
Figure 3–34. Report Switch Format and Example
Description
The AID of the active CP card.
The AID of the standby CP card.
The security category includes the following messages:
DLT-USER-SECU (page 3-64)
ED-PID (page 3-65)
ED-SECU (page 3-65)
ED-USER-SECU (page 3-67)
ENT-USER-SECU (page 3-69)
RTRV-USER-SECU (page 3-70)
3. TL1 Commands and Messages
Example
3-63