Operation Via Keypad - LG SV-iS5 Instruction Manual

2.5.3

Operation via Keypad

Setting: DRV-03 [Drive Mode (Run/Stop method)] = 0 (Keypad)
DRV-04 [Frequency Mode (Freq. setting method)] = 0 (Keypad-1)
1. Check the LCD display when Power ON. Otherwise, change the setting indicated above.
DRV▶K/K
00 STP
2. Set the Ref. Freq to 60 Hz using PROG/ENT/SHIFT , ? keys. Setting freq is displayed during stop.
DRV▶K/K
00 STP 60.00Hz
3. When pressing FWD/REV key, motor starts running and output freq and output current are displayed.
DRV▶K/K
00 FWD 60.00Hz
Press STOP/RESET key. Then motor decelerates to stop. Setting freq 60Hz is displayed.
4.
DRV▶K/K
00 STP 60.00Hz
Morek IT OÜ, Rauna 24, 76506 Saue Harjumaa, Estonia. www.morek.eu Tel. +372 604 1423 Fax +372 604 1447 morek@morek.eu
0.0 A
0.00Hz
0.0 A
5.0 A
0.0 A
37
Chapter 2 - Operation