Operation Via Control Terminal - LG SV-iS5 Instruction Manual

2.5.2

Operation via Control Terminal

Setting: DRV-03 [Drive Mode (Run/Stop method)] = 1 (Fx/Rx-1)
DRV-04 [Frequency Mode (Freq. setting method)] = 2 (V1)
1. Check the LCD display when Power ON. Otherwise, change the setting indicated above.
DRV▶T/V
00 STP
2. Turn the FX (or RX) terminal ON. Then FWD (or REV) LED will be lit.
DRV▶T/V
00 FWD
3. Set the frequency using V1 (Potentiometer). Output freq (60Hz)., Rotating direction (FWD or REV) and output
current (5A) will be displayed on the LCD.
DRV▶T/V
00 FWD 60.00Hz
4. Output freq value is decreasing when turning the potentiometer counterclockwise. Inverter output stops at 0.00Hz
and motor is stopped.
DRV▶T/V
00 FWD
5. Turn FX (or RX) terminal OFF.
DRV▶T/V
00 STP
Morek IT OÜ, Rauna 24, 76506 Saue Harjumaa, Estonia. www.morek.eu Tel. +372 604 1423 Fax +372 604 1447 morek@morek.eu
0.0 A
0.00Hz
0.0 A
0.00Hz
5.0 A
0.0 A
0.00Hz
0.0 A
0.00Hz
35
Chapter 2 - Operation