Ext-00: Jump To Desired Code#; Ext-01: Sub-Board Display; Ext-02 - Ext-04: Multi-Function Input Terminal Define (P4, P5, P6) - Sub-A, Sub-C; External Group [Ext] - LG SV-iS5 Instruction Manual

Chapter 6 - Parameter Description [EXT]

6.5 External Group [EXT]

EXT group appears only when an optional Sub-Board is
installed.
EXT-00: Jump to Desired Code #
EXT? Jump code
00 1
Factory Default:
1
Jumping directly to any parameter code can be
accomplished by entering the desired code number. This
code is available only with LCD keypad.

EXT-01: Sub-Board Display

EXT? Sub B/D
01 None
Factory Default:
None
This code automatically displays the kind of Sub-Board
installed.
Setting Range
LCD 7-Seg
This board provides three multi- function
input terminals (P4, P5, P6), three multi-
Sub-A 1
function output terminals (Q1, Q2, Q3),
Load meter output (LM) and second input
frequency reference (V2).
This board provides encoder input terminals
(AOC, BOC / A+, A-, B+, B-), encoder
2
Sub-B
output terminals (FBA, FBB) and power
terminals (+5V input, Vcc output).
This board provides three multi- function
input terminals (P4, P5, P6), one multi-
Sub-C 3
function output terminal (Q1), isolated
second input frequency reference (V2) and
two analog meters (AM1, AM2).
See ' Chapter 7 - Options' for more detail descriptions.
Morek IT OÜ, Rauna 24, 76506 Saue Harjumaa, Estonia. www.morek.eu Tel. +372 604 1423 Fax +372 604 1447 morek@morek.eu
01 0
0
Description
136
EXT-02 ~ EXT-04: Multi-Function Input Terminal
Define (P4, P5, P6) – Sub-A, Sub-C
EXT? P4 define
02 XCEL-L
Factory Default:
XCEL-L
An optional Sub-Board is needed if an application
requires more than three multi-function input terminals.
' Sub-A' and ' Sub-C' boards provide additional three
multi-function terminals. These terminals are used in
conjunction with P1, P2 and P3 terminals. Refer to I/O-
12 ~ I/O-14 for use. The following table shows the
terminal definitions.
Setting Range
LCD 7-Seg
0
Speed-L Multi-Step Speed - Low
1
Speed-M Multi-Step Speed - Mid
2
Speed-H Multi-Step Speed - High
3
XCEL-L Multi-Accel/Decel - Low
4
XCEL-M Multi-Accel/Decel - Mid
5
XCEL-H Multi-Accel/Decel - High
6
Dc-brake DC injection braking during stop
7
2nd Func Exchange to 2
8
Exchange Exchange to commercial power line
9
-Reserved- Reserved for future use
10
Up Up drive
11
Down Down drive
12
3-Wire 3 wire operation
13
Ext Trip-A External trip A
14
Ext Trip-B External trip B
15
iTerm Clear Used for PID control
Exchange between PID mode and
Open-loop 16
V/F mode
Exchange between Option and
Main-drive 17
Inverter
18
Analog hold Hold the analog input signal
19
XCEL stop Disable accel and decel
20
P Gain2 Used for PID control
21
SEQ-L Sequence operation - Low
22
SEQ-M Sequence operation - Mid
23
SEQ-H Sequence operation - High
Exchange between Sequence
24
Manual
operation and Manual operation
Triggering Sequence operation
25
Go step
(Auto-B)
26
Hold step Hold last step (Auto-A)
27
Trv Off.Lo
Used for Traverse Operation
28
Trv Off.Hi
29
Interlock1
30
Interlock2
Used for MMC operation
31
Interlock3
32
Interlock4
Speed-X 33 Additional Step frequency selection
Reset 34 Reset
02 3
3
Description
functions
nd