Operating Precautions; Handling And Installation - LG SV-iS5 Instruction Manual

n Install the inverter on a non-flammable surface. Do not place
flammable material nearby.
Otherwise, fire could occur.
n Disconnect the input power if the inverter gets damaged.
Otherwise, it could result in a secondary accident and fire.
n Do not touch the inverter while the input power is applied or after
removed. It will remain hot for a couple of minutes.
Otherwise, you may get bodily injuries such as skin-burn or damage.
Do not apply power to a damaged inverter or to an inverter with
n
parts missing even if the installation is complete.
Otherwise, electric shock could occur.
n Do not allow lint, paper, wood chips, dust, metallic chips or other
foreign matter into the drive.
Otherwise, fire or accident could occur.

OPERATING PRECAUTIONS

(1) Handling and installation

¨
Handle according to the weight of the product.
¨
Do not stack the inverter boxes higher than the number recommended.
¨
Install according to instructions specified in this manual.
¨
Do not open the cover during delivery.
¨
Do not place heavy items on the inverter.
¨
Check the inverter mounting orientation is correct.
¨
Do not drop the inverter, or subject it to impact.
¨
Use the ground impedance of 100ohm or less for 200 V Class and 10ohm or less for
400V class.
¨
Take protective measures against ESD (Electrostatic Discharge) before touching the
pcb for inspection or installation.
¨
Use the inverter under the following environmental conditions:
Morek IT OÜ, Rauna 24, 76506 Saue Harjumaa, Estonia. www.morek.eu Tel. +372 604 1423 Fax +372 604 1447 morek@morek.eu
CAUTION
III