Fu2-07: Dwell Frequency; Fu2-08: Dwell Time; Fu2-10 - Fu2-16: Frequency Jump - LG SV-iS5 Instruction Manual

Chapter 6 - Parameter Description [FU2]

FU2-07: Dwell Frequency

FU2-08: Dwell Time

FU2? Dwell freq
07 5.00 Hz
Factory Default:
5.00 Hz
FU2? Dwell time
08 0.0 sec
Factory Default:
0.0 sec
This function is used to output torque in an intended
direction. It is useful in hoisting applications to get
enough torque before a releasing mechanical brake. If
the dwell time is set at ' 0' , this function is not available.
In dwell operation, the inverter outputs AC voltage not a
DC voltage.
☞
Note: DC Injection Braking does not output torque to an
intended direction. It is just to hold the motor.
☞
Note: Do not set the Dwell frequency above run
frequency. Otherwise, it may lead to operation fault.
Output Frequency
FU1-07
t1
t1: FU2-08 [Dwell Time]
Output Current
Run Command
FX-CM
Mechanical
Brake
[Dwell Operation]
Morek IT OÜ, Rauna 24, 76506 Saue Harjumaa, Estonia. www.morek.eu Tel. +372 604 1423 Fax +372 604 1447 morek@morek.eu
07 5.00
5.00
08 0.0
0.0
Time
Time
ON
Time
Release
Time
FU2-10 ~ FU2-16: Frequency Jump
FU2? Jump freq
10 --- No ---
Factory Default:
No
FU2? jump lo 1
11 10.00 Hz
Factory Default:
10.00 Hz
FU2? jump Hi 1
12 15.00 Hz
Factory Default:
15.00 Hz
FU2? jump lo 3
15 30.00 Hz
Factory Default:
30.00 Hz
FU2? jump Hi 3
16 35.00 Hz
Factory Default:
35.00 Hz
To prevent undesirable resonance and vibration on the
structure of the machine, this function locks out the
potential resonance frequency from occurring. Three
different jump frequency ranges may be set. This
avoidance of frequencies does not occur during
accelerating or decelerating. It only occurs during
continuous operation.
Output Frequency
Freq. Max
FU2-12
FU2-11
FU2-14
FU2-13
FU2-16
FU2-15
10Hz 20Hz 30Hz
[Frequency Jump]
100
10 0
0
11 10.00
10.00
12 15.00
15.00
□
□
15 30.00
30.00
16 35.00
35.00
Reference
Frequency