Ext-40: Am1 (Analog Meter 1) Output - Sub-C; Ext-41: Am1 Adjustment; Ext-42: Am2 (Analog Meter 2) Output - Sub-C; Ext-43: Am2 Adjustment - LG SV-iS5 Instruction Manual

[DC link vtg]
LM terminal outputs the DC link voltage of inverter. The
output value is determined by,
LM Output Voltage = (DC link voltage / Max. DC link
voltage) × 10V × FM output gain (I/O-41) / 100
[Torque]
M terminal outputs the motor torque. The output value
F
is determined by,
FM terminal output voltage= (Torque current/Rated
torque current) X10V X FM output gain (I/O-41) / 150
LM Terminal Output
15Vpeak
500Hz, 2msec (fixed)
[LM Output (LM-CM terminal)]
Related Functions: I/O-40 ~ I/O-41 [FM Output]
Morek IT OÜ, Rauna 24, 76506 Saue Harjumaa, Estonia. www.morek.eu Tel. +372 604 1423 Fax +372 604 1447 morek@morek.eu
Chapter 6 - Parameter Description [EXT]
EXT-40: AM1 (Analog Meter 1) Output – Sub-C

EXT-41: AM1 Adjustment

EXT-42: AM2 (Analog Meter 2) Output – Sub-C

EXT-43: AM2 Adjustment

These terminals are provided on Sub-C board.
EXT? AM1 mode
40 Frequency
Factory Default:
EXT? AM1 Adjust
41
Factory Default:
Avg. 0~10V
Time
EXT? AM2 mode
42 DC link Vtg
Factory Default:
EXT? AM2 Adjust
43
Factory Default:
Analog meter displays the inverter output Frequency,
Current, Voltage, DC link voltage and T orque with
analog voltage on the AM1 and AM2 terminals of Sub-C
board. The output voltage ranges from 0V to 10V. EXT -
41 and EXT -43 are used to adjust the AM output value.
[Frequency]
The AM terminal outputs inverter output frequency. The
output value is determined by,
AM Output Voltage = (Output freq. / Max. freq.) × 10V X
AM Output Gain (EXT41~42)/ 100
[Current]
The AM terminal outputs inverter output current. The
output value is determined by,
AM Output Voltage = (Output current / Rated current) ×
10V X AM Output Gain (EXT41~42)/ 150
141
40
Frequency
41
100 %
100 %
42
DC link Vtg
43
100 %
100 %
0
0
100
100
3
3
100
100