LG SV-iS5 Instruction Manual page 134

Chapter 6 - Parameter Description [I/O]
I/O-40: FM (Frequency Meter) Output
I/O-41: FM Adjustment
I/O? FM mode
40 Frequency
Factory Default:
Frequency
I/O? FM Adjust
41 100 %
Factory Default:
100 %
Frequency meter displays the inverter output Frequency,
Current, Voltage and DC link voltage with pulse signals
on the FM terminal. The average ranges from 0V to 10V.
I/O-41 is used to adjust the FM value.
[Frequency]
FM terminal outputs inverter output frequency. The
output value is determined by,
FM Output Voltage = (Output freq. / Max. freq.) × 10V ×
IO-41 / 100
[Current]
FM terminal outputs inverter output current. T he output
value is determined by,
FM Output Voltage = (Output current / Rated current) ×
10V × IO-41 / 150
[Voltage]
FM terminal outputs inverter output voltage. The output
value is determined by,
FM Output Voltage = (Output voltage / Max. output
voltage) × 10V × IO-41 / 100
[DC link vtg]
FM terminal outputs the DC link voltage of inverter. The
output value is determined by,
FM Output Voltage = (DC link voltage / Max. DC link
voltage) × 10V × IO-41 / 100
[Torque]
FM terminal outputs the Torque of inverter. The output
value is determined by,
FM Output Voltage = (Torque current / Rated Torque
current) × 10V × IO-41 / 150
Morek IT OÜ, Rauna 24, 76506 Saue Harjumaa, Estonia. www.morek.eu Tel. +372 604 1423 Fax +372 604 1447 morek@morek.eu
40 0
0
41 100
100
128
FM Terminal Output
15Vpeak
500Hz, 2msec (fixed)
[FM Output (FM-CM terminal)]
I/O-42: FDT (Frequency Detection) Level
I/O-43: FDT Bandwidth
I/O? FDT freq
42 30.00 Hz
Factory Default:
30.00 Hz
I/O? FDT band
43 10.00 Hz
Factory Default:
10.00 Hz
These functions are used in I/O-44 [Multi-function
Auxiliary Contact Output]. See [FDT -#] in I/O-44.
Use Sub-Boards if you need to use multi-function output
terminal Q1, Q2, and Q3.
Related Functions:
I/O-44 [Multi-function Auxiliary Output]
Avg. 0~10V
Time
42 30.00
30.00
43 10.00
10.00